DriverInstall_en_US - message keys to en_US translation catalogue (441 entries)

key: PO_IDC_STATIC_2DBAR_TYPE
en_US: Set Type:

key: PO_GSTR_SET
en_US: Set

key: PO_IDC_STATIC_80_BAR_CODE_HRI_POSITION
en_US: HRI Print Position:

key: PO_IDC_STATIC_80_BAR_CODE_BAR_WIDTH
en_US: Bar Width:

key: PO_IDC_STATIC_80_BAR_CODE_HRI_FONT
en_US: HRI Font:

key: PO_IDC_STATIC_80_BAR_CODE_BAR_HEIGHT
en_US: Bar Height:

key: PO_IDC_STATIC_80_BAR_LEFT_SPACING
en_US: Left Spacing:

key: PO_IDC_STATIC_80_BAR_CODE_BARCODE_TYPE
en_US: Bar Code:

key: PO_IDC_BUTTON_80_BAR_CODE_SET_ALL
en_US: Set All

key: PO_IDC_BUTTON_80_PRINT_2DBAR
en_US: Print 2DBAR

key: PO_IDC_STATIC_80_2DBAR_PRINT
en_US: 2DBAR Size:

key: PO_IDC_STATIC_80_2DBAR_COMPONENT_TYPE
en_US: Component type:

key: PO_IDC_STATIC_80_2DBAR_CHECK_LEVEL
en_US: Check Level:

key: PO_IDC_STATIC_80_2DBAR_DATA
en_US: 2DBAR Data:

key: PO_IDC_BUTTON_80_PRINT_PDF417
en_US: Print PDF417

key: PO_IDC_STATIC_80_PDF417_COLUMN
en_US: PDF417 Column:

key: PO_IDC_STATIC_80_PDF417_RECOVERY_LEVEL
en_US: Recovery Level:

key: PO_IDC_STATIC_80_PDF417_RATIO
en_US: Horizontal Vertical Ratio:

key: PO_IDC_STATIC_80_PDF417_DATA
en_US: PDF417 Data:

key: PO_GSTR_80_BAR_CODE_NOT_PRINT
en_US: Not Print

key: PO_GSTR_80_BAR_CODE_UPPER_PRINT
en_US: Upper

key: PO_GSTR_80_BAR_CODE_BELOW_PRINT
en_US: Below

key: PO_GSTR_80_BAR_CODE_UPPER_AND_BELOW_PRINT
en_US: Upper and Below

key: PO_GSTR_80_CHAR_FONT_A
en_US: Font-A

key: PO_GSTR_80_CHAR_FONT_B
en_US: Font-B

key: PO_GSTR_80_NUMBER_ERR
en_US: Please input a number between 1 and 255.

key: PO_GSTR_80_BAR_NUMBER_ERROR
en_US: Please enter 11 digital characters!(1~9)

key: PO_GSTR_80_BAR_NUMBER_ERROR_JAN13
en_US: Please enter 12 characters!

key: PO_GSTR_80_BAR_NUMBER_ERROR_JAN8
en_US: Please enter 7 characters!

key: PO_GSTR_80_BAR_NUMBER_ERROR_ITF
en_US: Please enter an even digit character of less than 30 characters!

key: PO_GSTR_80_BAR_NUMBER_ERROR_CODE39
en_US: Please enter characters from 1 to 30 bits,Rang:(1~9) (A~Z)($ % + - . /)

key: PO_GSTR_80_BAR_NUMBER_ERROR_CODEBAR
en_US: Please enter characters from 1 to 30 bits,Rang:(1~9) (A~D)($ + - . / :)

key: PO_GSTR_80_BAR_NUMBER_ERROR_CODE
en_US: Please enter 1-30 characters!

key: PO_GSTR_80_BAR_NUMBER_ERROR_SPACING
en_US: Please input a number between 0 and 255.

key: PO_GSTR_80_2DBAR_DATA_ERROR
en_US: Please enter an digit character of less than 20 characters!

key: PO_GSTR_CODE_PAGE
en_US: Code Page:

key: PO_GSTR_BAUD_RATE
en_US: Baud Rate:

key: PO_GSTR_CHARACTER
en_US: Character:

key: PO_GSTR_CHS
en_US: Char Per Line:

key: PO_GSTR_DENSITY
en_US: Density:

key: PO_GSTR_PARITY
en_US: Parity:

key: PO_IDC_CHECK_BASE_BUZZER
en_US: Buzzer

key: PO_IDC_CHECK_BASE_CUTTER
en_US: Cutter

key: PO_IDC_CHECK_BASE_DRAWER
en_US: Drawer

key: PO_IDC_CHECK_BASE_BUZZER_AFTER_PRINT
en_US: Buzzer After Print

key: PO_IDC_CHECK_BASE_AUTO_REPRINT
en_US: Auto Reprint The Last Receipt

key: PO_GSTR_SELF_TEST
en_US: Self Test

key: PO_IDC_STATIC_BIG5_E
en_US: Emualtion Mode:

key: PO_IDC_STATIC_BIG5_LANGUAGE
en_US: Language:

key: PO_IDC_STATIC_BIG5_SPEED
en_US: Speed:

key: PO_IDC_STATIC_BIG5_BARDCODE_WIDE
en_US: Barcode Wide:

key: PO_IDC_STATIC_BIG5_PAPER_WIDTH
en_US: Paper Width:

key: PO_IDC_STATIC_BIG5_AUTO_REPRINT
en_US: Auto Reprint Mode:

key: PO_IDC_STATIC_BM_LENGHT
en_US: Black Mark Length:

key: PO_IDC_STATIC_BM_WIDTH
en_US: Black Mark Width:

key: PO_IDC_STATIC_BM_PRINT
en_US: Print After Black Mark:

key: PO_IDC_STATIC_BM_CUT
en_US: Cut After Black Mark:

key: PO_GSTR_ENABLE
en_US: Enable

key: PO_GSTR_DISABLE
en_US: Disable

key: PO_IDC_BUTTON_BLACK_NEXT_MARK
en_US: Next Black Mark

key: PO_IDC_BUTTON_BLACK_NEXT_CUT
en_US: Next Cut

key: PO_GSTR_BM_NUMBER_ERR
en_US: Please input a number

key: PO_IDC_STATIC_RPP_DEV_NAME
en_US: Device Name:

key: PO_IDC_STATIC_RPP_PIN
en_US: Pin:

key: PO_IDC_STATIC_RPP_MODEL_NAME
en_US: Model Name:

key: PO_IDC_STATIC_RPP_SERIAL
en_US: Device Number:

key: PO_GSTR_RPP_DEV_NAME_EMPTY_ERR
en_US: Please input device name

key: PO_GSTR_RPP_PIN_EMPTY_ERR
en_US: Please input pin

key: PO_GSTR_RPP_PIN_FORMAT_ERR
en_US: pin only for the digital

key: PO_GSTR_RPP_MODEL_NAME_EMPTY_ERR
en_US: Please input model name

key: PO_GSTR_RPP_SERIAL_EMPTY_ERR
en_US: Please input serial

key: PO_IDC_CHECK_80_CHAR_FONTB
en_US: Font B

key: PO_IDC_CHECK_80_CHAR_BOLD
en_US: Bold

key: PO_IDC_CHECK_80_CHAR_TIMES_HIGH
en_US: Times High

key: PO_IDC_CHECK_80_CHAR_DOUBLE_WIDTH
en_US: Double Width

key: PO_IDC_CHECK_80_CHAR_UNDERLINE
en_US: Underline

key: PO_IDC_CHECK_80_CHAR_INVERSE
en_US: Inverse

key: PO_IDC_CHECK_80_CHAR_ROTATE
en_US: Rotate 90°cw

key: PO_IDC_CHECK_80_CHAR_CHINESE
en_US: Chinese

key: PO_IDC_CHECK_80_CHAR_OVERLAP
en_US: Overlap

key: PO_IDC_CHECK_80_CHAR_BOLD_PRINT
en_US: Bold

key: PO_IDC_CHECK_80_CHAR_USER_CHARACTER
en_US: User Character

key: PO_IDC_CHECK_80_CHAR_RESUPINATE
en_US: Resupinate

key: PO_IDC_STATIC_80_CHAR_CHARACTER_SET
en_US: Character:

key: PO_IDC_STATIC_80_CHAR_UNDERLINE_SET
en_US: Underline:

key: PO_IDC_STATIC_80_CHAR_CODE_PAGE
en_US: Code Page:

key: PO_IDC_STATIC_80_CHAR_FONT
en_US: Font:

key: PO_IDC_STATIC_80_CHAR_CHARACTER_SIZE
en_US: Character Size:

key: PO_IDC_STATIC_H
en_US: H

key: PO_IDC_STATIC_W
en_US: W

key: PO_IDC_STATIC_80_CHAR_RIGHT_SPACING
en_US: Right Char Spacing:

key: PO_IDC_STATIC_80_CHAR_CANCEL
en_US: Cancel User Char:

key: PO_IDC_STATIC_80_CHAR_CHINESE_SPACING
en_US: Chinese Spacing:

key: PO_IDC_STATIC_L
en_US: L

key: PO_IDC_STATIC_R
en_US: R

key: PO_IDC_STATIC_80_CHAR_USER_CHINESE
en_US: User Chinese:

key: PO_IDC_BUTTON_80_KEY_SET
en_US: Key Set

key: PO_80_IDC_RICHEDIT2_PRINT_TEST
en_US: Please enter the test content!（123456789）

key: PO_GSTR_80_CHAR_UNERLINE_CLOSE
en_US: Close

key: PO_GSTR_80_CHAR_UNERLINE_1
en_US: Unerline-1

key: PO_GSTR_80_CHAR_UNERLINE_2
en_US: Unerline-2

key: PO_GSTR_80_USER_CHINESE_NUMBER_ERR
en_US: Please specify a value between 161 and 254.

key: PO_GSTR_80_CANCEL_CHAR_NUMBER_ERR
en_US: Please specify a value between 32 and 126.

key: PO_DLG_CHARACTER_ADDRESS
en_US: Address

key: PO_IDC_STATIC_ADDR
en_US: Address

key: PO_IDC_BUTTON_ADDR_OK
en_US: OK

key: PO_IDC_BUTTON_ADDR_CANCEL
en_US: Cancel

key: PO_GSTR_CHAR_LIB_ADDR_ERROR
en_US: Address range: 0~4294967295;

key: PO_IDC_STATIC_CHARACTER_LIBRARY_SELECT
en_US: Select A Printer Character Library:

key: PO_IDC_BUTTON_CHARACTER_LIBRARY_OPEN
en_US: Select Font

key: PO_IDC_BUTTON_CHARACTER_LIBRARY_UPDATE
en_US: Update

key: PO_GSTR_INVALID_FIRMWARE
en_US: Invalid Firmware

key: PO_GSTR_FONT_DATALEN_MAX_ERROR
en_US: Exceeds the maximum amount of data supported by the printer.(Maximum data volume: 4M Bytes)

key: PO_GSTR_FONT_DATALEN_MIN_ERROR
en_US: Exceeds the minimum amount of data supported by the printer.(Minimum data volume: 256 Bytes)

key: PO_GSTR_SETTING_SUCCESS
en_US: Setting Success!

key: PO_GSTR_SETTING_FAIL
en_US: Setting Fail!

key: PO_GSTR_DOWNLOAD_CHARACTER_LIB
en_US: Downloading character library...........

key: PO_GSTR_UPDATE_FAIL
en_US: Update fail!

key: PO_GSTR_UPDATE_SUCCESS
en_US: Update success!

key: PO_GSTR_CHECK_INFO_SN_ERR
en_US: Please enter a valid serial number

key: PO_GSTR_CHECK_INFO_SN_LEN_ERR
en_US: The length of SN must between 6~37

key: PO_IDC_STATIC_FIRMWARE
en_US: FIRMWARE:

key: PO_IDC_STATIC_FACTORY
en_US: FACTORY:

key: PO_IDC_STATIC_DEVICE
en_US: DEVICE:

key: PO_IDC_STATIC_SN
en_US: SN:

key: PO_GSTR_LOAD_INFO_ERR
en_US: Failed to get the data of Check Information module

key: PO_GSTR_INVALID_IP_FIRST_PART
en_US:  is not a valid entry. Please specify a value between 1 and 223.

key: PO_GSTR_INVALID_IP_FIRST_PART_127
en_US: IP addresses starting with 127 are not valid because they are reserved for loopback addresses. Please specify some other valid value between 1 and 223.

key: PO_GSTR_NET_INPUT_VALID_PORT
en_US: Please enter a valid port

key: PO_IDC_STATIC_CMD_SETTING_CMD_TYPE
en_US: Command type:

key: PO_IDC_STATIC_CMD_SETTING_PAPER_WIDTH
en_US: Paper width:

key: PO_GSTR_LABEL_COMMAND
en_US: Label Command

key: PO_GSTR_ESC_POS
en_US: ESC/POS

key: PO_IDC_STATIC_80_CONTROL_CUTTING_MODE
en_US: Cutting Mode:

key: PO_IDC_STATIC_80_CONTROL_FEED_POINTS
en_US: Feed Points:

key: PO_IDC_STATIC_80_CONTROL_BUZZER_TIMES
en_US: Buzzer times:

key: PO_IDC_STATIC_80_CONTROL_BUZZER_TIME
en_US: Buzzer time:

key: PO_IDC_STATIC_80_CONTROL_CHINESE_FORMAT
en_US: Chinese Format:

key: PO_IDC_STATIC_80_CONTROL_PANEL_BUTTON
en_US: Panel buttons:

key: PO_IDC_BUTTON_80_SET
en_US: Set

key: PO_IDC_BUTTON_80_CONTROL_FULL_CUT
en_US: Full Cut

key: PO_IDC_BUTTON_80_CONTROL_HALF_CUT
en_US: Half Cut

key: PO_IDC_BUTTON_80_CONTROL_SET_ALL
en_US: Set All

key: PO_GSTR_80_CONTROL_PANEL_BUTTON_ACTIVATION
en_US: Activation

key: PO_GSTR_80_CONTROL_PANEL_BUTTON_PROHIBIT
en_US: Prohibit

key: PO_GSTR_80_CONTROL_CUTTING_MODE_CUTTING
en_US: Cutting

key: PO_GSTR_80_CONTROL_CUTTING_MODE_FEED_CUTTING
en_US: Feed and Cutting

key: PO_GSTR_80_CONTROL_BUZZER_SET
en_US: Please input a number between 1 and 9.

key: PO_DOWNLOAD_DLG_CAPTION
en_US: Download

key: PO_DOWNLOAD_DLG_PROGRAM
en_US: Program

key: PO_DOWNLOAD_DLG_LOGO
en_US: Logo

key: PO_DOWNLOAD_DLG_CHARACTER_LIB
en_US: Character Library

key: PO_IDD_DIALOG_ETHERNET
en_US: Ethernet

key: PO_GSTR_OK
en_US: OK

key: PO_GSTR_CANCEL
en_US: Exit

key: PO_IDC_STATIC_80_FORMAT_LINE_SPACING
en_US: Line Spacing:

key: PO_IDC_STATIC_80_FORMAT_BLANK_AMOUNT
en_US: Left Blank Amount:

key: PO_IDC_STATIC_80_FORMAT_PRINT_POSITION
en_US: Relative Print Position:

key: PO_IDC_STATIC_80_FORMAT_PRINT_AREA
en_US: Print Area Width:

key: PO_IDC_STATIC_80_FORMAT_A_PRINT_POSITION
en_US: Absolute Print Position:

key: PO_IDC_STATIC_80_FORMAT_ALIGN_MODE
en_US: Alignment Mode:

key: PO_IDC_BUTTON_80_SET_DEFAIT_LINE_SPACING
en_US: Defait Line Spacing

key: PO_GSTR_80_FORMAT_ALIGN_LEFT
en_US: Align Left

key: PO_GSTR_80_FORMAT_ALIGN_CENTER
en_US: Align Center

key: PO_GSTR_80_FORMAT_ALIGN_RIGHT
en_US: Align Right

key: PO_GSTR_80_PAGE_PRINT_AREA_NUMBER_ERR
en_US: Please input a number between 1 and 65535.

key: PO_IDC_STATIC_80_GRAPHICAL_PRINT_BITMAP
en_US: Print Bitmap:

key: PO_IDC_STATIC_80_GRAPHICAL_PRINT_RASTER_BITMAP
en_US: Print Raster Bitmap:

key: PO_IDC_STATIC_80_GRAPHICAL_BITMAP
en_US: Bitmap:

key: PO_IDC_BUTTON_80_GRAPHICAL_SELECT_BITMAP
en_US: Select Bitmap

key: PO_IDC_BUTTON_80_PRINT_NV_BITMAP
en_US: Print NV Bitmap

key: PO_IDC_BUTTON_80_GRAPHICAL_SET_ALL
en_US: Set All

key: PO_GSTR_80_GRAPHICAL_8_SINGLE_DENSITY
en_US: 8-Single Density

key: PO_GSTR_80_GRAPHICAL_8_DOUBLE_DENSITY
en_US: 8-Double Density

key: PO_GSTR_80_GRAPHICAL_24_SINGLE_DENSITY
en_US: 24-Single Density

key: PO_GSTR_80_GRAPHICAL_24_DOUBLE_DENSITY
en_US: 24-Double Density

key: PO_GSTR_80_GRAPHICAL_COMMON_MODE
en_US: Common

key: PO_GSTR_80_GRAPHICAL_DOUBLE_WIDTH
en_US: Double Width

key: PO_GSTR_80_GRAPHICAL_TIMES_HIGHER
en_US: Times Higher

key: PO_GSTR_80_GRAPHICAL_FOURFOLD
en_US: Fourfold

key: PO_GSTR_80_PRINT_BITMAP_ERROR
en_US: Please select a bitmap.

key: PO_IDD_DIALOG_GRAYSCALE_PRINT
en_US: Grayscale Print

key: PO_IDC_STATIC_BASE_OLD_IMAGE
en_US: Original image:

key: PO_IDC_STATIC_BASE_NEW_IMAGE
en_US: Transformed:

key: PO_IDC_BUTTON_TEST_PRINT
en_US: Test Print

key: PO_IDC_BUTTON_OK
en_US: OK

key: PO_IDC_BUTTON_CANCLE
en_US: Cancel

key: PO_IDC_STATIC_HEART_TIME
en_US: Heat Time:

key: PO_GSTR_HOTTIME_NUMBER_ERR
en_US: You input must be bigger than 300

key: PO_GSTR_HOTTIME_NUMBER_OVER_ERR
en_US: You input must be less than 800

key: PO_GSTR_LOGO_LIST_MAX
en_US: Can't add log list any more

key: PO_GSTR_INFO_DELETE_LOGO
en_US: Deleteing logo............

key: PO_GSTR_DELETE_LOGO_ERR
en_US: Delete logo fail

key: PO_GSTR_DELETE_LOGO_SUCCESS
en_US: Delete success.

key: PO_GSTR_SHOW_ONLY_ONE_ERR
en_US: There was displaying the first picture when selected multiple pictures.

key: PO_GSTR_SELECT_LOGO_ERR
en_US: Please select a logo!

key: PO_GSTR_INFO_DOWNLOAD_LOGO
en_US: Downloading

key: PO_GSTR_INFO_DOWNLOAD_LOGO_BMP
en_US:  logo............

key: PO_GSTR_DOWNLOAD_LOGO_ERR
en_US: Download logo fail

key: PO_GSTR_DOWNLOAD_LOGO_SUCCESS
en_US: Download success.

key: PO_GSTR_DOWNLOADING_LOGO
en_US: Downloading Logo......

key: PO_GSTR_PRINTER_CAPACITY_OVERSTEP
en_US: Exceeds the maximum amount of data supported by the printer.Please select the right size Logo to download again.

key: PO_GSTR_ONLY_ONE_FILE_SELECT
en_US: Only one bmp file can be selected

key: PO_GSTR_INFO_GET_LOGO
en_US: Geting

key: PO_GSTR_INFO_GET_LOGO_BMP
en_US:  logo............

key: PO_IDC_STATIC_GET_LOGO_FAIL_NOTICE
en_US: Notice: Get message from printer fail

key: PO_GSTR_ERROR_LOGO_MAX
en_US: Exceeds the maximum number of Logo supported by the printer.The default gets the first 64 logo.

key: PO_GSTR_GETING_LOGO
en_US: Getting Logo......

key: PO_IDC_STATIC_LOGO_NOTICE
en_US: The number of Logo get from printer is

key: PO_GSTR_SET_SUCCESS
en_US: Set success

key: PO_GSTR_SET_FAIL
en_US: Set fail

key: PO_IDC_STATIC_PROGRAM_SELECT
en_US: Select A Printer Firmware:

key: PO_GSTR_ADD
en_US: Add

key: PO_GSTR_DELETE
en_US: Delete

key: PO_GSTR_DOWNLOAD
en_US: Download

key: PO_GSTR_PRINT_LOGO_EXIST
en_US: Print Logo

key: PO_GSTR_GET_LOGO
en_US: Get Logo

key: PO_GSTR_MODIFY_LOGO
en_US: Modify Logo

key: PO_IDC_BUTTON_LOGO_LOOK_UP
en_US: Look Up

key: PO_GSTR_CONFIG_LPT
en_US: Configure LPT Port

key: PO_GSTR_TIMEOUT
en_US: Timeout(seconds)

key: PO_GSTR_RETRY
en_US: Transmission Retry

key: PO_GSTR_LPT_OK
en_US: OK

key: PO_GSTR_LPT_CANCEL
en_US: CANCEL

key: PO_GSTR_CONFIG_PORT_ERROR
en_US: Can't config port

key: PO_GSTR_RONGTA_MAIN_DLG_CAPTION
en_US: aqproxPrinterTool

key: PO_GSTR_MAIN_DLG_CAPTION
en_US: aqproxPrinterTool

key: PO_IDC_STATIC_MAIN_GROUP
en_US: Communication with printer

key: PO_IDC_RADIO_SELECT_PORT
en_US: Port:

key: PO_IDC_RADIO_SELECT_DRIVER
en_US: Printer Driver:

key: PO_IDC_BUTTON_CONFIG_PORT
en_US: Config Port

key: PO_IDC_BUTTON_SET
en_US: Set Printer

key: PO_IDC_BUTTON_DOWNLOAD
en_US: Download

key: PO_GSTR_SET_COM_NEED_CONFIG
en_US: You need Configure com port first

key: PO_GSTR_SET_ENET_NEED_CONFIG
en_US: You need Configure ip first

key: PO_GSTR_CANNOT_CONFIG_PORT
en_US: The port no configuration

key: PO_IDC_STATIC_NET_PORT
en_US: Port:

key: PO_IDC_STATIC_NET_DUPLEX_MODE
en_US: Duplex Mode:

key: PO_GSTR_CHECK_MAC_FAIL
en_US: MAC is not a valid entry. Please specify a value between 00 and ff.

key: PO_GSTR_CHECK_MAC_ALL_ZERO
en_US: MAC can not all zero. Please specify a value between 00 and ff.

key: PO_80_CMD_TEST_DLG_NVBITMAP
en_US: NV Bitmap

key: PO_IDC_BUTTON_80_BITMAP_ADD
en_US: Add

key: PO_IDC_BUTTON_80_BITMAP_DELETE
en_US: Delete

key: PO_IDC_BUTTON_80_BITMAP_PRINT
en_US: Print

key: PO_GSTR_NVBITMAP_NAME
en_US: NVBitmap List

key: PO_IDC_STATIC_QUEUE_NUMBER
en_US: Sequence Number:

key: PO_IDC_STATIC_DATE_AND_TIME
en_US: Date and Time:

key: PO_IDC_STATIC_OTHER_76_MODE
en_US: 76 Print Mode:

key: PO_IDC_STATIC_OTHER_80_MODE
en_US: 80 Print Mode:

key: PO_IDC_STATIC_OTHER_RUN_OUT_OF_PAPER
en_US: Run Out of Paper:

key: PO_IDC_STATIC_OTHER_CHANGE_PORT
en_US: Change Port:

key: PO_IDC_STATIC_OTHER_VOLUME_SET
en_US: Volume Set:

key: PO_IDC_STATIC_OTHER_USB_SET
en_US: USB Set:

key: PO_IDC_STATIC_OTHER_BLACK_MARK_SET
en_US: Black Mark:

key: PO_GSTR_76MM_MODE
en_US: 76mm paper mode

key: PO_GSTR_58MM_MODE
en_US: 58mm paper mode

key: PO_GSTR_USB
en_US: Printer USB

key: PO_GSTR_USB_PORT
en_US: Virtual Serial Port

key: PO_GSTR_STANDARD_BLACK_MARK
en_US: Standard

key: PO_GSTR_OLD_BLACK_MARK
en_US: Old Type

key: PO_GSTR_VOLUME_VOICELESS
en_US: Voiceless

key: PO_GSTR_VOLUME_SOFTLY
en_US: Softly

key: PO_GSTR_VOLUME_MODERATE
en_US: Moderate

key: PO_GSTR_VOLUME_LOUD
en_US: Loud

key: PO_IDC_BUTTON_80_PAGE_MODE_PRINT
en_US: Print

key: PO_IDC_BUTTON_80_PAGE_MODE_SET
en_US: Page Mode

key: PO_IDC_BUTTON_80_STANDARD_MODE_SET
en_US: Standard Mode

key: PO_IDC_BUTTON_80_PAGE_MODE_PRINT_AND_STANDARD
en_US: Print and Standard Mode

key: PO_IDC_STATIC_80_PAGE_MODE_PRINT_DIRECTION
en_US: Print Direction:

key: PO_IDC_STATIC_80_PAGE_MODE_FOURFOLD_CHINESE
en_US: Fourfold Chinese:

key: PO_IDC_STATIC_80_PAGE_MODE_PRINT_POSITION
en_US: Print Position:

key: PO_IDC_STATIC_80_PAGE_MODE_PRINT_AREA
en_US: Print Area:

key: PO_IDC_STATIC_80_PAGE_MODE_VERTICAL_PRINT_POSITION
en_US: Absolute Vertical Position:

key: PO_IDC_STATIC_80_PAGE_MODE_RELATIVE_VERTICAL_POSITION
en_US: Relative Vertical Position:

key: PO_IDC_STATIC_80_PAGE_MODE_TEST_PRINT
en_US: Test Print Mode:

key: PO_IDC_BUTTON_80_PAGE_MODE_TEST_PRINT
en_US: Test Print

key: PO_IDC_STATIC_PAGE_MODE
en_US: Page Mode

key: PO_IDC_STATIC_STANDARD_MODE
en_US: Standard Mode

key: PO_GSTR_80_PAGE_MODE_LEFT_TO_RIGHT
en_US: Left To Right

key: PO_GSTR_80_PAGE_MODE_BOTTOM_TO_TOP
en_US: Bottom To Top

key: PO_GSTR_80_PAGE_MODE_RIGHT_TO_LEFT
en_US: Right To Left

key: PO_GSTR_80_PAGE_MODE_TOP_TO_BOTTOM
en_US: Top To Bottom

key: PO_GSTR_80_CHAR_CLOSE
en_US: Close

key: PO_GSTR_80_PAGE_MODE_OPEN
en_US: Open

key: PO_GSTR_80_TEST_PRINT_MODE_DUMP
en_US: Dump

key: PO_GSTR_80_TEST_PRINT_MODE_PRINTER_STATE
en_US: Printer State

key: PO_GSTR_80_TEST_PRINT_MODE_ROLL_OF_PAPER
en_US: Roll of Paper

key: PO_GSTR_80_COUNTER_PRINT_POSITION_RIGHT_1
en_US: Align Right 1

key: PO_GSTR_80_COUNTER_PRINT_POSITION_RIGHT_2
en_US: Align Right 2

key: PO_GSTR_80_COUNTER_PRINT_POSITION_LEFT
en_US: Align left

key: PO_IDC_STATIC_TOP_EMPTY_CUT_RATE
en_US: Delete Empty Space At The Top:

key: PO_IDC_STATIC_BELOW_EMPTY_CUT_RATE
en_US: Delete Empty Space In The Below:

key: PO_IDC_STATIC_INTERVAL_CUT_RATE
en_US: Cut Rate of Line Interval:

key: PO_IDC_STATIC_CHANGE_LINE_CUT_RATE
en_US: Cut Rate of Change Line:

key: PO_IDC_STATIC_CUT_HEIGHT_RATE
en_US: Cut Rate of bar-code's Height:

key: PO_IDC_STATIC_PAPER_NORMAL
en_US: Normal:

key: PO_IDC_STATIC_PAPER_CUSTOM
en_US: Custom:

key: PO_IDC_BUTTON_PAPER_SAVE_SET
en_US: Set

key: PO_GSTR_NONE
en_US: None

key: PO_GSTR_PARAM_SET_DLG_CAPTION
en_US: Printer Info

key: PO_GSTR_PARAM_SET_OK
en_US: OK

key: PO_GSTR_SEND_TCP_DATA_ERROR
en_US: Send data to printer fail.

key: PO_PRINTER_SET_DLG_CAPTION
en_US: Set Printer

key: PO_PRINTER_SET_DLG_BASE
en_US: Base

key: PO_PRINTER_SET_DLG_EHTERNET
en_US: Ethernet

key: PO_PRINTER_SET_DLG_WIFI
en_US: Wifi

key: PO_GSTR_RPP_BLUETOOTH_NOTICE
en_US: Bluetooth setting

key: PO_PRINTER_SET_DLG_BM
en_US: BlackMark

key: PO_PRINTER_SET_DLG_RPP
en_US: RPP

key: PO_PRINTER_SET_DLG_HEART_TIME
en_US: Heat Time

key: PO_PRINTER_SET_DLG_2D_BAR
en_US: 2D Barcode

key: PO_PRINTER_SET_DLG_SERIAL
en_US: Serial

key: PO_PRINTER_SET_DLG_SERIAL_PRINTER
en_US: Search Printer

key: PO_PRINTER_SET_DLG_BIG5
en_US: BIG5

key: PO_PRINTER_SET_DLG_CMD_SETTING
en_US: CmdType Setting

key: PO_PRINTER_SET_DLG_PAPER_SAVE
en_US: PaperSave

key: PO_PRINTER_SET_DLG_OTHER
en_US: Other

key: PO_GSTR_UPDATE_FIRMWARE_SUCCESS
en_US: Update Firmware success

key: PO_IDC_BUTTON_PROGRAM_OPEN
en_US: Select a program file

key: PO_IDC_BUTTON_PROGRAM_UPDATE
en_US: Update

key: PO_IDC_STATIC_RPP_FONT
en_US: Font:

key: PO_IDC_STATIC_RPP_IDLE_TIME
en_US: Idle Time:

key: PO_IDC_STATIC_RPP_MAX_FEED
en_US: Max Feed:

key: PO_IDC_STATIC_RPP_PAGE_LEN
en_US: Page Len:

key: PO_IDC_STATIC_RPP_OFF_TIME
en_US: Off Time:

key: PO_IDC_STATIC_SERIAL_NUMBER_BITS
en_US: Number of data bits:

key: PO_GSTR_STOP_BITS
en_US: Stop bits:

key: PO_IDC_STATIC_SERIAL_HAND_SHAKE
en_US: Hand shake:

key: PO_IDC_BUTTON_80_STATE_PRINTER
en_US: Printer State

key: PO_IDC_BUTTON_80_STATE_OFFLINE
en_US: Offline State

key: PO_IDC_BUTTON_80_STATE_ERROR
en_US: Error State

key: PO_IDC_BUTTON_80_STATE_PAPER
en_US: Continuous Paper State

key: PO_IDC_STATIC_80_STATE_NOT_OBTAIN
en_US: Not obtain state

key: PO_IDC_BUTTON_80_STATE_ERROR_RECOVERY
en_US: Error recovery

key: PO_IDC_BUTTON_80_STATE_CLEAR_BUFFER
en_US: Clear buffer

key: PO_IDC_BUTTON_80_STATE_PRINT_PAPER_STATE
en_US: Print Paper State

key: PO_IDC_BUTTON_80_STATE_SEND_PULSE
en_US: Send Pulse

key: PO_IDC_BUTTON_80_STATE_PRINTER_INFORMATION
en_US: Get

key: PO_IDC_STATIC_80_STATE_CUTTER_BOX_PIN
en_US: Cutter-Box Pin:

key: PO_IDC_STATIC_80_STATE_PULSE_TIME
en_US: Pulse Level time:

key: PO_IDC_STATIC_80_STATE_CUTTER_BOX_OUTPUT_PIN
en_US: Cutter-Box Pin:

key: PO_IDC_STATIC_80_STATE_BOOT_TIME
en_US: Boot time:

key: PO_IDC_STATIC_80_STATE_OFF_TIME
en_US: Off time:

key: PO_IDC_STATIC_80_STATE_PRINTER_INFORMATION
en_US: Printer Information:

key: PO_IDC_BUTTON_80_PRINTER_INITIALIZATION
en_US: Printer Initialization

key: PO_IDC_BUTTON_80_STATE_SET_ALL
en_US: Set All

key: PO_GSTR_80_STATE_CUTTER_BOX_PIN_2
en_US: Pin-2

key: PO_GSTR_80_STATE_CUTTER_BOX_PIN_5
en_US: Pin-5

key: PO_GSTR_80_STATE_ID_MODEL
en_US: ID Model

key: PO_GSTR_80_STATE_ID_NUMBER
en_US: ID Model Number

key: PO_GSTR_80_STATE_HARDWARE_VERSION
en_US: Hardware Version

key: PO_GSTR_80_STATE_MANUFACTURER
en_US: Manufacturer

key: PO_GSTR_80_STATE_PRINTER_NAME
en_US: Printer Name

key: PO_GSTR_80_STATE_COM_NAME
en_US: Port Name

key: PO_GSTR_80_STATE_CHARACTER
en_US: Character

key: PO_GSTR_CAN_NOT_GET_PRINTER_SETTING_INFO
en_US: Can not get the printed information from this port.

key: PO_GSTR_80_STATE_CUTTER_BOX_OPEN
en_US: Cutter-box:open.

key: PO_GSTR_80_STATE_CUTTER_BOX_CLOSE
en_US: Cutter-box:closed.

key: PO_GSTR_80_STATE_COVER_PLATE_OPEN
en_US: Cover:open.

key: PO_GSTR_80_STATE_COVER_PLATE_CLOSE
en_US: Cover:closed.

key: PO_GSTR_80_STATE_PAPER_FEED
en_US: Feed:Paper feed key.

key: PO_GSTR_80_STATE_NOT_PAPER_FEED
en_US: Feed:Not pass paper feed key.

key: PO_GSTR_80_STATE_ERROR_HAPPEN
en_US: Error:Error occurred.

key: PO_GSTR_80_STATE_NO_ERROR
en_US: Error:No error.

key: PO_GSTR_80_STATE_PAPER_CUTTING_ERROR
en_US: Error:Automatic cutting error.

key: PO_GSTR_80_STATE_NO_PAPER_CUTTING_ERROR
en_US: Error:No automatic cutting error.

key: PO_GSTR_80_STATE_IRRECOVERABLE_ERROR
en_US: Error:Unrecoverable error occured.

key: PO_GSTR_80_STATE_NO_UNRECOVERABLE_ERROR
en_US: Error:No unrecoverable error.

key: PO_GSTR_80_STATE_AUTO_RECOVERRY_ERROR
en_US: Error:auto-recoverry error occured.

key: PO_GSTR_80_STATE_NO_AUTO_RECOVERRY_ERROR
en_US: Error:No auto-recoverry error.

key: PO_GSTR_80_STATE_RUN_OUT_OF_PAPER
en_US: Paper:Run out of paper.

key: PO_GSTR_80_STATE_HAVE_PAPER
en_US: Paper:Have paper.

key: PO_GSTR_80_STATE_PULSE_TIME_ERROR
en_US: Please input a number between 1 and 8.

key: PO_GSTR_80_STATE_HEXADECIMAL
en_US: ID Model:hexadecimal.

key: PO_GSTR_80_STATE_DECIMALISM
en_US: ID Model:decimalism.

key: PO_GSTR_80_STATE_SUPPORT_CHARACTER
en_US: ID Model Number:support multi byte character.

key: PO_GSTR_80_STATE_NOT_SUPPORT_CHARACTER
en_US: ID Model Number:not support multi byte character.

key: PO_GSTR_80_STATE_HARDWARE_VERSION_SHOW
en_US: Hardware Version:

key: PO_GSTR_80_STATE_MANUFACTURER_SHOW
en_US: Manufacturer:

key: PO_GSTR_80_STATE_PRINTER_NAME_SHOW
en_US: Printer Name:

key: PO_GSTR_80_STATE_PORT_NAME_SHOW
en_US: Port Name:

key: PO_GSTR_80_STATE_CHARACTER_SHOW
en_US: Character Mode:

key: PO_GSTR_PARAM_SET_SELECT_PRINTER
en_US: Please select a existent printer!

key: PO_IDC_BUTTON_UDP_STATUS
en_US: Status

key: PO_GSTR_REBOOT
en_US: Reboot Printer

key: PO_GSTR_SEARCH
en_US: Search Printers

key: PO_IDC_STATIC_UDP_NOTICE
en_US: Notice: After searched printers, please select the printer before other operation.

key: PO_IDC_STATIC_UDP_LOCAL_IP
en_US: Local IP Address:

key: PO_IDC_STATIC_WIFI_MODE
en_US: Mode:

key: PO_GSTR_TYPE
en_US: Type:

key: PO_IDC_STATIC_WIFI_WPA_ENCRY
en_US: Encryption:

key: PO_IDC_STATIC_WIFI_WPA_KEY
en_US: PSK Key:

key: PO_IDC_STATIC_WIFI_WEP_KEY
en_US: Key:

key: PO_IDC_RADIO_WIFI_NONE
en_US: OPEN(No Keys)

key: PO_GSTR_WIFI_SSID_EMPTY_ERR
en_US: SSID is empty,please input SSID

key: PO_GSTR_WIFI_PSKKEY_ERR
en_US: PSK key is empty,please input PSK key

key: PO_GSTR_WIFI_WEP_KEY_ERR
en_US: WEP key is empty,please input WEP key

key: PO_GSTR_OPEN_COM_ERROR
en_US: Cann't open com

key: PO_GSTR_SET_COM_FAIL
en_US: Configure com port fail

key: PO_GSTR_WRITE_COM_FAIL
en_US: Write com printer fail

key: PO_GSTR_READ_COM_FAIL
en_US: Read com printer fail

key: PO_GSTR_COM_GET_COMM_STATE_FAIL
en_US: Get com state fail

key: PO_GSTR_WRITE_ENET_FAIL
en_US: Write enet printer fail

key: PO_GSTR_READ_ENET_FAIL
en_US: Read enet printer fail

key: PO_GSTR_OPEN_LPT_FAIL
en_US: Open lpt fail

key: PO_GSTR_WRITE_LPT_FAIL
en_US: Write lpt printer fail

key: PO_GSTR_READ_LPT_FAIL
en_US: Read lpt printer fail

key: PO_GSTR_GET_LPT_CONFIG_ERROR
en_US: Get LPT configure fail

key: PO_GSTR_OPEN_PRINTER_FAIL
en_US: Open printer fail

key: PO_GSTR_WRITE_PRINTER_FAIL
en_US: Write printer fail

key: PO_GSTR_READ_PRINTER_FAIL
en_US: Read printer fail

key: PO_GSTR_START_DOC_FAIL
en_US: Start doc fail

key: PO_GSTR_START_PAGE_FAIL
en_US: Start page fail

key: PO_GSTR_END_PAGE_FAIL
en_US: End page fail

key: PO_GSTR_END_DOC_FAIL
en_US: End doc fail

key: PO_GSTR_WRITE_PRINTER_LESS
en_US: Raw data send to printer is less than request

key: PO_GSTR_OPEN_USB_FAIL
en_US: Open usb printer fail

key: PO_GSTR_WRITE_USB_FAIL
en_US: Write usb printer fail

key: PO_GSTR_READ_USB_FAIL
en_US: Read usb printer fail

key: PO_GSTR_WRITE_USB_LESS
en_US: Raw data send to usb printer is less than request

key: PO_GSTR_ENET_CONNECT_FAIL
en_US: Net connection failure

key: PO_GSTR_ENET_READ_LESS
en_US: Raw data send to usb printer is less than request

key: PO_80_CMD_TEST_DLG_CAPTION
en_US: 80Cmd Test

key: PO_80_CMD_TEST_DLG_PRINT
en_US: Print cmd test

key: PO_80_CMD_TEST_DLG_FORMAT
en_US: Format Set

key: PO_80_CMD_TEST_DLG_CHAR
en_US: Char Set

key: PO_80_CMD_TEST_DLG_GRAPHICAL
en_US: Graphical Set

key: PO_80_CMD_TEST_DLG_BARCODE
en_US: Barcode Set

key: PO_80_CMD_TEST_DLG_STATE
en_US: Printer State

key: PO_80_CMD_TEST_DLG_CONTROL
en_US: Control cmd

key: PO_80_CMD_TEST_DLG_PAGE_MODE
en_US: Page Mode

key: PO_IDC_STATIC_80_PRINT_FEED_LINE
en_US: Feed Line:

key: PO_IDC_STATIC_80_PRINT_FEED_POINTS
en_US: Number Of Input Points:

key: PO_IDC_STATIC_80_PRINT_LEVEL_LOCATION
en_US: Horizontal Positioning Points:

key: PO_IDC_STATIC_80_PRINT_ESC_N
en_US: Printer Status:

key: PO_IDC_BUTTON_80_PRINT_LF
en_US: Print and newline

key: PO_IDC_BUTTON_80_PRINT_CR
en_US: Print and return

key: PO_IDC_BUTTON_80_PRINT_HT
en_US: Horizontal positioning

key: PO_IDC_BUTTON_80_SELF_TEST
en_US: Self Test

key: PO_GSTR_80_PRINTER_INHIBIT
en_US: Prohibit

key: PO_GSTR_80_PRINTER_ACTIVATION
en_US: Activation
